How to monitor hardware RAID array status from Linux

 First check which raid card we are using:To find out which RAID you are using, just type one command to the command line:[root@school ~]# lspci -vv | grep -i raid15:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS-3 3108 [Invader] (rev 02) Kernel driver in use: megaraid_sas Kernel modules: megaraid_sasThere may be several responses to this request: 1. Hewlett-Packard is your HP RAID array 2. 3ware is your 3ware RAID array 3. megaRAID is your MegaRAID arrayIf we do not receive a response or some other answer,...